基于非线性模型预测的翼伞系统控制研究

翼伞系统在飞行过程中,受外界不确定因素的影响呈现出非线性特性和耦合性．应用非线性模型预测控制理论对翼伞系统飞行控制进行了研究,提出基于非线性模型预测控制的翼伞系统控制律设计方法,并推导出控制律解析式．仿真研究表明,合理地选择泰勒展开级数和预测周期,通过泰勒级数展开并截尾后的翼伞非线性控制系统可以表现出良好的控制性能．     

小波神经网络UCAV飞行控制系统

针对采用H∞控制设计方法需求解难度很大的偏微分方程,而导致工程实现难度大的问题,提出了采用小波神经网络进行无人攻击机(UCAV)飞行控制系统设计的方法,该方法集小波变换和神经网络的优点于一身,简化了网络训练,避免了系统达到局部最优解,使得系统具有更好的逼近精度。通过仿真实验表明,利用小波神经网络进行UCAV控制律设计,使系统具有较好的跟踪性和鲁棒性,避免了精确模型的建立,便于分析系统的稳定性。     

船舶静态电场跟踪的渐进更新扩展卡尔曼滤波器

为了实现利用船舶静态电场对船舶进行跟踪的目的,针对传统卡尔曼滤波算法中存在的问题,设计一种新的非线性滤波器。建立船舶的状态空间模型,分析传统卡尔曼滤波算法在船舶跟踪中存在的问题;依据渐进贝叶斯思想,利用连续白噪声与离散白噪声序列噪声协方差之间的关系,设计一种新的渐进更新扩展卡尔曼滤波器。仿真结果表明,该滤波器能有效地抑制由于初始误差较大而造成的滤波性能下降和滤波发散,能够有效地跟踪船舶,具有较高的实用价值。     

Optimal switchover times between two activities utilizing the same resource

The “gold‐mining” decision problem is concerned with the efficient utilization of a delicate mining equipment working in a number of different mines. Richard Bellman was the first to consider this type of a problem. The solution found by Bellman for the finite‐horizon, continuous‐time version of the problem with two mines is not overly realistic since he assumed that fractional parts of the same mining equipment could be used in different mines and this fraction could change instantaneously. In this paper, we provide some extensions to this model in order to produce more operational and realistic solutions. Our first model is concerned with developing an operational policy where the equipment may be switched from one mine to the other at most once during a finite horizon. In the next extension we incorporate a cost component in the objective function and assume that the horizon length is not fixed but it is the second decision variable. Structural properties of the optimal solutions are obtained using nonlinear programming. Each model and its solution is illustrated with a numerical example. The models developed here may have potential applications in other areas including production of items requiring the same machine or choosing a sequence of activities requiring the same resource. © 2002 Wiley Periodicals, Inc. Naval Research Logistics 49: 186–203, 2002; DOI 10.1002/nav.10008     

消防法实施细则制定的必要性

《消防法》是消防工作的基本法律，完善的消防法律体系应当由消防法律、消防行政法规、地方消防法规、部门消防规章和地方消防规章组成。而目前我国的消防法律体系中却没有专门的消防行政法规。因此，制定《消防法实施细则》是完善消防立法体系、细化《消防法》、落实政府消防法律职责、拓展消防部队职能和借鉴其他法律的需要。     

混沌理论在雷达中的应用

混沌动力学作为一门新学科已经引起了世界各国科学界的重视,是近年来非线性科学领域的热门学科,混沌系统初值的敏感性和两个混沌系统间同步的实现,使得混沌用于保密通信成为可能,海杂波的混沌特性使人们开始探索混沌在雷达中的应用.研究表明,混沌在杂波分析与建模、信号检测、目标识别及伪随机码波形设计等领域内取得了可喜的成果.研究了混沌在雷达中的应用,分析了目前混沌在雷达中的应用现状,预测了未来研究发展的趋势.     

一类非线性控制系统模型的数学分析

采用非线性分析的方法,研究了一类非线性控制系统模型,得到解的整体存在性。     

一类非线性动力系统的时滞反馈分叉控制

对时滞控制作用下的参数激励van der Pol-Duffing方程进行了研究,着重研究了时滞参数对该类参数激励系统的1/2亚谐共振-主参数共振分叉响应控制。首先采用摄动法从理论上推导出时滞动力系统的分叉响应方程,再采用数值模拟的方法研究了时滞参数对系统分叉响应的影响。研究结果表明,适当选取时滞参数,不仅可以改变分叉响应曲线的拓扑形态,还可以平移分叉响应曲线,即使其分叉提前或滞后,还能同时满足这两种要求。     

一类脉冲时滞抛物型方程解的振动准则

讨论了一类含脉冲的时滞抛物型方程解的振动性,利用格林公式以及Jensen不等式,得出了该方程在一类边界条件下解的振动准则。     

A novel formulation of material nonlinear analysis in structural mechanics

This article demonstrates a novel approach for material nonlinear analysis. This analysis procedure eliminates tedious and lengthy step by step incremental and then iterative procedure adopted classically and gives direct results in the linear as well as in nonlinear range of the material behavior. Use of elastic moduli is eliminated. Instead, stress and strain functions are used as the material input in the analysis procedure. These stress and strain functions are directly derived from the stress-strain behavior of the material by the method of curve fitting. This way, the whole stress-strain diagram is utilized in the analysis which naturally exposes the response of structure when loading is in nonlinear range of the material behavior. It is found that it is an excellent computational procedure adopted so far for material nonlinear analysis which gives very accurate results, easy to adopt and simple in calculations. The method eliminates all types of linearity assumptions in basic derivations of equations and hence, eliminates all types of possibility of errors in the analysis procedure as well. As it is required to know stress distribution in the structural body by proper modelling and structural idealization, the proposed analysis approach can be regarded as stress-based analysis procedure. Basic problems such as uniaxial problem, beam bending, and torsion problems are solved. It is found that approach is very suitable for solving the problems of fracture mechanics. Energy release rate for plate with center crack and double cantilever beam specimen is also evaluated. The approach solves the fracture problem with relative ease in strength of material style calculations. For all problems, results are compared with the classical displacement-based liner theory.